[Discuss] Going open source. Need assistance

[Joshua Pearce]

Pablo

What type of FOSH did you design? There are many repositories - but we need
to know what it is to point you in the right direction until OSHWA creates
one database to rule them all...

Best regards
Joshua

Joshua M. Pearce, Ph.D.
Associate Professor
The Michigan Tech Open Sustainability Technology Lab
<http://www.appropedia.org/Category:MOST>
Department of Materials Science & Engineering
Department of Electrical & Computer Engineering
Michigan Technological University
601 M&M Building
1400 Townsend Drive
Houghton, MI 49931-1295
906-487-1466

Open Source Lab <http://store.elsevier.com/coArticle.jsp?pageid=18200010>


On Sat, Sep 6, 2014 at 8:00 AM, <discuss-request at lists.oshwa.org> wrote:

> Send discuss mailing list submissions to
>         discuss at lists.oshwa.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.oshwa.org/listinfo/discuss
> or, via email, send a message with subject or body 'help' to
>         discuss-request at lists.oshwa.org
>
> You can reach the person managing the list at
>         discuss-owner at lists.oshwa.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of discuss digest..."
>
>
> Today's Topics:
>
>    1. Going open source. Need assistance (Pablo Kulbaba)
>    2. Going open source. Need assistance (Pablo Kulbaba)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 06 Sep 2014 02:09:54 -0300
> From: Pablo Kulbaba <pablokulbaba at gmail.com>
> To: The Open Source Hardware Association Discussion List
>         <discuss at lists.oshwa.org>
> Subject: [Discuss] Going open source. Need assistance
> Message-ID: <540A9722.8000306 at gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi. I'm on the process of open sourcing a piece of hardware. I've
> decided to take the step and give OS a try with some of my own work.
> Already have the 3D model.
> What would be the practical steps to properly do this?
> Where do i register it?
> Any repository to recomend? GitHub?
> Stamping the license on the drawings? What about doing it on the 3D?
>
> Thanks in advance.
>
> --
> PabloK
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 06 Sep 2014 02:09:54 -0300
> From: Pablo Kulbaba <pablokulbaba at gmail.com>
> To: The Open Source Hardware Association Discussion List
>         <discuss at lists.oshwa.org>
> Subject: [Discuss] Going open source. Need assistance
> Message-ID: <540A9722.8000306 at gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi. I'm on the process of open sourcing a piece of hardware. I've
> decided to take the step and give OS a try with some of my own work.
> Already have the 3D model.
> What would be the practical steps to properly do this?
> Where do i register it?
> Any repository to recomend? GitHub?
> Stamping the license on the drawings? What about doing it on the 3D?
>
> Thanks in advance.
>
> --
> PabloK
>
>
>
> ------------------------------
>
> _______________________________________________
> discuss mailing list
> discuss at lists.oshwa.org
> http://lists.oshwa.org/listinfo/discuss
>
>
> End of discuss Digest, Vol 28, Issue 9
> **************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.oshwa.org/pipermail/discuss/attachments/20140906/57184e14/attachment.html>