[Discuss] Going open source. Need assistance

Pablo Kulbaba pablokulbaba at gmail.com
Tue Sep 9 00:38:28 UTC 2014


Hey Matt.
I'm planning on further development if there's enough interest and 
improvement ideas from general public.
I'm using 3d models and manufacturing sketches.
I'm planning on uploading files, posting pictures+text and making 
avalable comments on files and pictures+text.
Thanks for the repositories list.


On 06/09/2014 08:47 p.m., Matt Maier wrote:
> Do you plan on continuing development? Will there be a v2, v3, v4, etc.
> What sort of files are you using? CAD, text, images, etc.
>
> Thingiverse is good for CAD, particularly certain kinds of CAD, and is 
> okay for development.
> Github is great for text and development, but has a learning curve.
> ODE is good if you plan to be working on it with other people over a 
> long period of time.
> Etc.
>
> So far there isn't one obvious place to put your open source hardware 
> project, but the stuff you have available to publish and how much 
> collaboration you want to do moving forward will kind of point you in 
> the direction of a particular hosting platform.
>
>
> On Sat, Sep 6, 2014 at 4:23 PM, Pablo Kulbaba <pablokulbaba at gmail.com 
> <mailto:pablokulbaba at gmail.com>> wrote:
>
>     Joshua:
>     It's a bicycle trailer. Made of steel. Laser cut steel sheet,
>     square tubing with bends, and some round tubing.
>
>
>     On 06/09/2014 12:47 p.m., Joshua Pearce wrote:
>>     Pablo
>>
>>     What type of FOSH did you design? There are many repositories -
>>     but we need to know what it is to point you in the right
>>     direction until OSHWA creates one database to rule them all...
>>
>>     Best regards
>>     Joshua
>>
>>     Joshua M. Pearce, Ph.D.
>>     Associate Professor
>>     The Michigan Tech Open Sustainability Technology Lab
>>     <http://www.appropedia.org/Category:MOST>
>>     Department of Materials Science & Engineering
>>     Department of Electrical & Computer Engineering
>>     Michigan Technological University
>>     601 M&M Building
>>     1400 Townsend Drive
>>     Houghton, MI 49931-1295
>>     906-487-1466 <tel:906-487-1466>
>>
>>     Open Source Lab
>>     <http://store.elsevier.com/coArticle.jsp?pageid=18200010>
>>
>>
>>     On Sat, Sep 6, 2014 at 8:00 AM, <discuss-request at lists.oshwa.org
>>     <mailto:discuss-request at lists.oshwa.org>> wrote:
>>
>>         Send discuss mailing list submissions to
>>         discuss at lists.oshwa.org <mailto:discuss at lists.oshwa.org>
>>
>>         To subscribe or unsubscribe via the World Wide Web, visit
>>         http://lists.oshwa.org/listinfo/discuss
>>         or, via email, send a message with subject or body 'help' to
>>         discuss-request at lists.oshwa.org
>>         <mailto:discuss-request at lists.oshwa.org>
>>
>>         You can reach the person managing the list at
>>         discuss-owner at lists.oshwa.org
>>         <mailto:discuss-owner at lists.oshwa.org>
>>
>>         When replying, please edit your Subject line so it is more
>>         specific
>>         than "Re: Contents of discuss digest..."
>>
>>
>>         Today's Topics:
>>
>>            1. Going open source. Need assistance (Pablo Kulbaba)
>>            2. Going open source. Need assistance (Pablo Kulbaba)
>>
>>
>>         ----------------------------------------------------------------------
>>
>>         Message: 1
>>         Date: Sat, 06 Sep 2014 02:09:54 -0300
>>         From: Pablo Kulbaba <pablokulbaba at gmail.com
>>         <mailto:pablokulbaba at gmail.com>>
>>         To: The Open Source Hardware Association Discussion List
>>                 <discuss at lists.oshwa.org
>>         <mailto:discuss at lists.oshwa.org>>
>>         Subject: [Discuss] Going open source. Need assistance
>>         Message-ID: <540A9722.8000306 at gmail.com
>>         <mailto:540A9722.8000306 at gmail.com>>
>>         Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>>
>>         Hi. I'm on the process of open sourcing a piece of hardware. I've
>>         decided to take the step and give OS a try with some of my
>>         own work.
>>         Already have the 3D model.
>>         What would be the practical steps to properly do this?
>>         Where do i register it?
>>         Any repository to recomend? GitHub?
>>         Stamping the license on the drawings? What about doing it on
>>         the 3D?
>>
>>         Thanks in advance.
>>
>>         --
>>         PabloK
>>
>>
>>
>>         ------------------------------
>>
>>         Message: 2
>>         Date: Sat, 06 Sep 2014 02:09:54 -0300
>>         From: Pablo Kulbaba <pablokulbaba at gmail.com
>>         <mailto:pablokulbaba at gmail.com>>
>>         To: The Open Source Hardware Association Discussion List
>>                 <discuss at lists.oshwa.org
>>         <mailto:discuss at lists.oshwa.org>>
>>         Subject: [Discuss] Going open source. Need assistance
>>         Message-ID: <540A9722.8000306 at gmail.com
>>         <mailto:540A9722.8000306 at gmail.com>>
>>         Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>>
>>         Hi. I'm on the process of open sourcing a piece of hardware. I've
>>         decided to take the step and give OS a try with some of my
>>         own work.
>>         Already have the 3D model.
>>         What would be the practical steps to properly do this?
>>         Where do i register it?
>>         Any repository to recomend? GitHub?
>>         Stamping the license on the drawings? What about doing it on
>>         the 3D?
>>
>>         Thanks in advance.
>>
>>         --
>>         PabloK
>>
>>
>>
>>         ------------------------------
>>
>>         _______________________________________________
>>         discuss mailing list
>>         discuss at lists.oshwa.org <mailto:discuss at lists.oshwa.org>
>>         http://lists.oshwa.org/listinfo/discuss
>>
>>
>>         End of discuss Digest, Vol 28, Issue 9
>>         **************************************
>>
>>
>>
>>
>>     _______________________________________________
>>     discuss mailing list
>>     discuss at lists.oshwa.org  <mailto:discuss at lists.oshwa.org>
>>     http://lists.oshwa.org/listinfo/discuss
>
>     -- 
>     PabloK
>
>
>     _______________________________________________
>     discuss mailing list
>     discuss at lists.oshwa.org <mailto:discuss at lists.oshwa.org>
>     http://lists.oshwa.org/listinfo/discuss
>
>
>
>
> _______________________________________________
> discuss mailing list
> discuss at lists.oshwa.org
> http://lists.oshwa.org/listinfo/discuss

-- 
PabloK

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.oshwa.org/pipermail/discuss/attachments/20140908/7dd9f7b6/attachment-0001.html>


More information about the discuss mailing list