[Discuss] Going open source. Need assistance

Pablo Kulbaba pablokulbaba at gmail.com
Tue Sep 9 00:32:27 UTC 2014


J.:
I'll take your advice on "relevant details of open source hardware 
(purpose, Bill of Materials, CAD drawings, assembly and operating 
instructions, source code, etc)"
Lot's of work to do.
My interest right now is to upload 3d model in Freecad, and sketches, so 
they can be already accesible to public to be replicated.
ODE seems seems quite comprehensive, but big for the time present and 
this project in particular.
Thanks for the quick response.
PabloK.


On 06/09/2014 09:41 a.m., J. Simmons wrote:
> That's great news. I have a couple of Mach 30 projects that I think 
> are good examples of sharing all of the relevant details of open 
> source hardware (purpose, Bill of Materials, CAD drawings, assembly 
> and operating instructions, source code, etc). And I would be happy to 
> offer feedback on documentation if you would like.  Check out the 
> project wikis for both projects to see the full list of documents we 
> produce for our projects.
>
> * https://opendesignengine.net/projects/shepard-ts
> * https://opendesignengine.net/projects/groundsphere
>
> We host our projects on Open Design Engine, a github or source forge 
> for hardware projects that Mach 30 setup and runs as a community 
> service for oshw developers. It is free to use and we are committed to 
> supporting the site in the long run (it is after all where we publish 
> our own projects).
>
> Hope that helps,
>
>  -J
>
> On Saturday, September 6, 2014, Pablo Kulbaba <pablokulbaba at gmail.com 
> <mailto:pablokulbaba at gmail.com>> wrote:
>
>     Hi. I'm on the process of open sourcing a piece of hardware. I've
>     decided to take the step and give OS a try with some of my own work.
>     Already have the 3D model.
>     What would be the practical steps to properly do this?
>     Where do i register it?
>     Any repository to recomend? GitHub?
>     Stamping the license on the drawings? What about doing it on the 3D?
>
>     Thanks in advance.
>
>     -- 
>     PabloK
>
>     _______________________________________________
>     discuss mailing list
>     discuss at lists.oshwa.org
>     http://lists.oshwa.org/listinfo/discuss
>
>
>
> -- 
> J. Simmons, President
> Mach 30: Foundation for Space Development
> http://mach30.org
> <https://www.facebook.com/Mach30> <http://twitter.com/mach_30> 
> <https://plus.google.com/u/0/b/104373960473278544446/104373960473278544446/posts>
> /~ ad astra per civitatem ~
> /to the stars through community
>
>
>
> _______________________________________________
> discuss mailing list
> discuss at lists.oshwa.org
> http://lists.oshwa.org/listinfo/discuss

-- 
PabloK

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.oshwa.org/pipermail/discuss/attachments/20140908/23d6b926/attachment.html>


More information about the discuss mailing list