[Discuss] Going open source. Need assistance
Pablo Kulbaba
pablokulbaba at gmail.com
Sat Sep 6 23:23:50 UTC 2014
Joshua:
It's a bicycle trailer. Made of steel. Laser cut steel sheet, square
tubing with bends, and some round tubing.
On 06/09/2014 12:47 p.m., Joshua Pearce wrote:
> Pablo
>
> What type of FOSH did you design? There are many repositories - but we
> need to know what it is to point you in the right direction until
> OSHWA creates one database to rule them all...
>
> Best regards
> Joshua
>
> Joshua M. Pearce, Ph.D.
> Associate Professor
> The Michigan Tech Open Sustainability Technology Lab
> <http://www.appropedia.org/Category:MOST>
> Department of Materials Science & Engineering
> Department of Electrical & Computer Engineering
> Michigan Technological University
> 601 M&M Building
> 1400 Townsend Drive
> Houghton, MI 49931-1295
> 906-487-1466
>
> Open Source Lab <http://store.elsevier.com/coArticle.jsp?pageid=18200010>
>
>
> On Sat, Sep 6, 2014 at 8:00 AM, <discuss-request at lists.oshwa.org
> <mailto:discuss-request at lists.oshwa.org>> wrote:
>
> Send discuss mailing list submissions to
> discuss at lists.oshwa.org <mailto:discuss at lists.oshwa.org>
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.oshwa.org/listinfo/discuss
> or, via email, send a message with subject or body 'help' to
> discuss-request at lists.oshwa.org
> <mailto:discuss-request at lists.oshwa.org>
>
> You can reach the person managing the list at
> discuss-owner at lists.oshwa.org <mailto:discuss-owner at lists.oshwa.org>
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of discuss digest..."
>
>
> Today's Topics:
>
> 1. Going open source. Need assistance (Pablo Kulbaba)
> 2. Going open source. Need assistance (Pablo Kulbaba)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 06 Sep 2014 02:09:54 -0300
> From: Pablo Kulbaba <pablokulbaba at gmail.com
> <mailto:pablokulbaba at gmail.com>>
> To: The Open Source Hardware Association Discussion List
> <discuss at lists.oshwa.org <mailto:discuss at lists.oshwa.org>>
> Subject: [Discuss] Going open source. Need assistance
> Message-ID: <540A9722.8000306 at gmail.com
> <mailto:540A9722.8000306 at gmail.com>>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi. I'm on the process of open sourcing a piece of hardware. I've
> decided to take the step and give OS a try with some of my own work.
> Already have the 3D model.
> What would be the practical steps to properly do this?
> Where do i register it?
> Any repository to recomend? GitHub?
> Stamping the license on the drawings? What about doing it on the 3D?
>
> Thanks in advance.
>
> --
> PabloK
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 06 Sep 2014 02:09:54 -0300
> From: Pablo Kulbaba <pablokulbaba at gmail.com
> <mailto:pablokulbaba at gmail.com>>
> To: The Open Source Hardware Association Discussion List
> <discuss at lists.oshwa.org <mailto:discuss at lists.oshwa.org>>
> Subject: [Discuss] Going open source. Need assistance
> Message-ID: <540A9722.8000306 at gmail.com
> <mailto:540A9722.8000306 at gmail.com>>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi. I'm on the process of open sourcing a piece of hardware. I've
> decided to take the step and give OS a try with some of my own work.
> Already have the 3D model.
> What would be the practical steps to properly do this?
> Where do i register it?
> Any repository to recomend? GitHub?
> Stamping the license on the drawings? What about doing it on the 3D?
>
> Thanks in advance.
>
> --
> PabloK
>
>
>
> ------------------------------
>
> _______________________________________________
> discuss mailing list
> discuss at lists.oshwa.org <mailto:discuss at lists.oshwa.org>
> http://lists.oshwa.org/listinfo/discuss
>
>
> End of discuss Digest, Vol 28, Issue 9
> **************************************
>
>
>
>
> _______________________________________________
> discuss mailing list
> discuss at lists.oshwa.org
> http://lists.oshwa.org/listinfo/discuss
--
PabloK
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.oshwa.org/pipermail/discuss/attachments/20140906/3871f9f7/attachment-0001.html>
More information about the discuss
mailing list